The trails are closing. Hunting camp’s winding down. And your ATV or side-by-side is about to sit for a while.
A little prep now can make a BIG difference when you’re ready to ride again. Get your machine clean, dry, protected, and stored the right way, and you’ll have a much better shot at an easy spring start. Skip the basics, and winter can leave you dealing with a weak battery, stale fuel, flat-spotted tires, or unwanted visitors under the hood.
Here’s a practical ATV winter storage checklist, plus a few ways to turn the off-season into project season. Always check your owner’s manual first. Storage steps can vary by make, model, fuel system, battery type, and accessories.
Before you park your machine for months, wash off mud, grime, and road salt. Pay extra attention to the undercarriage, suspension, wheel wells, and other places where muck likes to hang out.
Then let it dry all the way. Don’t rush straight from the hose to the cover. Trapped water can encourage corrosion and leave moisture sitting against the machine.
And here’s the big one: never cover a dirty, damp ATV or UTV and call it protected. A cover can trap dirt and moisture against the surfaces underneath. That’s not winter protection: it’s a recipe for a rougher spring cleanup.
Once everything is clean and dry, use a suitable cover in a dry, ventilated storage spot. Choose one designed for your machine and storage conditions. Avoid wrapping a damp vehicle in an airtight tarp; ventilation matters.

Fuel left sitting for months may not be ready to go when riding season returns. For many machines, the storage routine involves adding a fuel stabilizer that’s appropriate for the fuel and following the product label and owner’s manual.
Some manufacturers recommend topping off the fuel tank after adding stabilizer to reduce empty space where condensation can form. Others specify different steps for certain fuel systems. Don’t guess, and don’t mix storage procedures from different machines. Use fresh fuel when preparing for storage, follow the specified dosage, and run the engine only as directed so treated fuel reaches the system.
If your ATV has a carburetor, the manual may call for a different process than it does for fuel injection. The key is to follow the instructions for your exact machine, not a one-size-fits-all checklist from the internet.
Cold weather and long stretches without use can be tough on a battery. If your machine will sit for an extended period, check the manufacturer’s recommendations for your battery and electrical system.
Depending on the setup, the right plan may be a compatible automatic battery tender/maintainer or removing and storing the battery. Use a maintainer made for your battery type, and follow its safety instructions. If disconnecting or removing the battery, follow your machine’s specified procedure.
Got accessories wired in, like a light bar, winch, audio system, or sound bar? Those may affect battery draw even when the machine is parked. Make sure accessories are shut down or protected as their manufacturers recommend. A drained battery in spring is a pretty lousy way to start riding season!
Check your tires for damage, then set pressure to the cold PSI specified by your owner’s manual. Don’t rely on a generic number or automatically add extra air.
For long-term side-by-side winter storage, reducing the load on the tires can help prevent flat spots. If your manual allows it and you have the proper equipment, support the machine using approved stands at the specified points. If you can’t elevate it, check the tires periodically and consider moving the machine a little, if that’s safe and practical.
The storage surface matters, too. A dry, level garage or shed is ideal. Avoid leaving the machine sitting in a damp spot where moisture can collect underneath.
Rodents love a quiet, undisturbed vehicle. Before storage, check the machine for signs of nesting and choose a clean, dry location when possible. Inspect it periodically through winter, especially if it’s stored near food, hay, or other materials that may attract pests.
Use rodent-deterrent products only as directed and in a way that’s safe for the machine. If your manual allows you to cover openings like the intake or exhaust, use a removable cover that’s easy to spot, and leave yourself a clear reminder to remove it before starting the engine. Check for nests, chewed wiring, and blocked openings before spring startup.

A stock machine and a customized machine don’t always have the same storage needs. LED light bars, winches, sound bars, and audio systems all add wiring and connections worth checking before the machine sits.
Look for loose or damaged wiring, confirm switches are off, and follow the accessory maker’s instructions for storage. If you’re unsure how an add-on is wired, or whether it could draw power while parked, get a qualified installer to take a look. A tidy, protected electrical setup is a smart investment in your whole build.
When the machine’s tucked away, it’s a great time to plan upgrades without missing a ride. Maybe you want better lighting for early starts and late returns. Maybe it’s time to refresh the audio, update your tires, or give your machine a whole new look.
Team Nutz helps customers plan and install vehicle customization projects, including powersports graphics. Check out our custom graphics and vinyl options for ideas, or browse DIYCustoms.store for parts. DIYCustoms.store offers free shipping on orders over $200, check product details and fitment carefully before ordering.

Before you close the garage door, run through this list:
Team Nutz has been helping customers with customization projects since January 2001. That’s 25 years in business in 2026. Our team includes MECP-certified technicians, and qualifying work is backed by a 1-year in-house labor warranty, plus the manufacturer’s lifetime warranty on parts. We’re proud of our 4.9-star rating and 1,200+ reviews.
Want to talk through a lighting, audio, graphics, or other winter upgrade? Stop by 3287 Library Road (Route 88), Castle Shannon, South Hills of Pittsburgh, PA 15234.
And if the machine that pulls your trailer needs a hand in the cold, we install remote starters too. Tow rigs, side-by-sides, the daily driver, we can set up the whole fleet of your toys.
CALL/TEXT: 412-882-8346
EMAIL: sales@teamnutztechnology.com
Hours: Monday–Friday, 9 AM–6 PM; closed Saturday and Sunday.
Our call center is available 24/7 to take your message, with a callback the next business day. Tell us what you ride and what you want to build. Welcome to the TEAM!!!
Start by checking your owner’s manual, then clean and fully dry the ATV, prepare the fuel and battery as directed, set tire pressure to the specified PSI, and store it somewhere dry and ventilated. Use a suitable cover only after the machine is clean and dry.
Don’t start it for brief, occasional idling unless your owner’s manual specifically recommends that routine. Follow the manufacturer’s storage and startup guidance; short runs may not bring everything fully up to operating conditions.
Store the machine in a clean, dry place and inspect it regularly for nesting or chewed wiring. If you cover openings to discourage pests, follow the manual and leave a reminder to remove every cover or plug before starting the ATV.